Repairs By Manufacturer
Repairs By Manufacturer (cont.)
Dodge Kelsey Hayes ABS Module Rebuild
EBCM/Anti-Lock Brake Controller
Please do not send hydraulic pump when mailing. You will be charged for additional shipping and/or module removal if pump is attached. We only need the electronic portion pictured.
- Tested before repair, disassembled, complete rebuild for typical symptoms performed, reassembled, and clean PCB.
- Your unit is bench tested after repair and codes cleared
- No programming required when installing
- 2 business day turn-around. The rest is shipping time
Common Codes/Symptoms for this unit
This unit typically suffers from a running pump motor, relay fault codes, and solenoid fault codes. If you are experiencing wheel speed sensor codes, you should check your wheel speed sensors or circuits. If you have tested your wheel speed sensor circuit "by the book", and/or replaced sensor and tested wiring, but can not get code to clear, you must contact us before purchase. These modules CAN NOT be swapped with a salvage unit due to VIN programming. If the pump motor runs too long it can burn up the motor. Pull large ABS fuse or unplug pump to temporarily resolve running condition, until module is repaired. Your unit must look like the one pictured.
Vehicle can be driven with electronic module removed, as long as fluid from pump has not been disconnected. Vehicle will retain normal braking, without the function of ABS.
This repair services:
98-08 Ram Truck 1500, 2500, 3500 w/ 4Whl Sensor ABS
98-08 Ram Van 1500, 2500, 3500 w/ 4Whl Sensor ABS
98-04 Dakota w/ 4Whl Sensor ABS
99-03 Durango w/ 4Whl Sensor ABS